Thank you for requesting your 100% FREE lifetime license of Forex Analyzer PRO systems & Strategies!
I promise you won’t regret it!
Start benefiting from Forex Analyzer PRO in just 3 simple steps.
Estimated time to complete your activation is 3 minutes or less.
It’s extremely important to follow the steps as shown below.
Otherwise it won’t work!
Good luck,
Jeff
[thrive_headline_focus title=”1. Activate Your Free Lifetime License” orientation=”center”]
Forex Analyzer PRO systems & strategies work exclusively with XM MT4. The system won’t work with any other Metatrader 4 broker!
Clicking the link below will take you to the free broker signup page. No deposit required! At the same time, your license will be automatically activated!
[thrive_link color=’red’ link=’http://www.forexmarkt.be/XM’ size=’big’ align=’aligncenter’]Open Free Account & Activate License![/thrive_link]
You don’t need to make any deposits to your account in order to run the system! Please follow the XM guidelines to download and install the Metatrader 4 platform.
Then proceed to step 2.
[thrive_headline_focus title=”2. Download Forex Analyzer PRO” orientation=”center”]
Download the ForexAnalyzerPro.zip file below and unzip (131kB). The file is completely safe to download.
Finally proceed to step 3.
[thrive_headline_focus title=”3. Install Forex Analyzer PRO ” orientation=”center”]
The unzipped file contains two MT4 files called, ForexAnalyzerPRO.ex4 and ForexAnalyzerPRO.dll. You will need to install both files in order for the system to work.
Open XM Metatrader 4 and follow the steps below to get you up-and-running in less than 1 minute.
1. Install the ForexAnalyzerPRO.dll file into the XM MT4 libraries folder.
From the MT4 top menu > File > Open Data Folder > MQL4 > Libraries (copy in this folder)
Fig. 1.0 Click on open Data Folder to open the data folder
Fig. 1.1 Click on MQL4 to open the MQL4 folder
Fig. 1.2 Click on Libraries to open the Libraries folder.
2. Install ForexAnalyzerPRO.ex4 into the XM MT4 indicators folder.
From the MT4 top menu > File > Open Data Folder > MQL4 > Indicators (copy in this folder)
Fig. 1.3 Click on Indicators to open the indicators folder.
3. Close XM Metatrader 4 and restart the platform.
You need to restart the MetaTrader 4 trading platform for the changes to take effect.
4. Attach ForexAnalyzerPRO.ex4 indicator to any chart and enable its dll.
Allow DLL imports. Checkbox this from the common Forex Analyzer PRO indicator tab.
Fig. 1.4 Allow DLL imports. Check the box and press ok.
You’re done, Forex Analyzer PRO should work now.
[thrive_headline_focus title=”4. Download The Custom MT4 Indicators” orientation=”center”]
These indicators will be used to put all forex trading systems and strategies together.
Download the Piranhaindicators.zip file below and unzip. Be sure to read the installation instructions document inside the unzipped file.
[thrive_headline_focus title=”5. Troubleshooting” orientation=”center”]
Q: I installed the indicator and attached it to a chart and ForexAnalyzerPRO displays ” Indicator Recompiled!”
A: Do not recompile the indicator, it does not work. Remove the DLL file and ForexAnalyzerPRO.ex4 from XM Metatrader 4 and install both files again without trying to recompile any of the files. This should solve the installation problem.